Position:China Plastic Machinery Network>Domestic IT>Songs Shunde Plastic Machinery Co failed in 34 batches
Songs Shunde Plastic Machinery Co failed in 34 batches
From;  Author:



Quality and Technical Supervision of Guangdong Province, Guangdong Province in 2010 has recently informed of plastic machinery products quality supervision and inspection results on a regular basis. The total test in Guangzhou, Shenzhen, Foshan and other cities of 8 123 enterprises produced a total of 149 batches of plastic machinery products, inspected 115 batches of product sampling batch pass rate of 77.2%. Failed mainly for electrical safety.

Substandard electrical installations hidden safety problems of products, plastic mechanical work is characterized by continuous high temperature for a long time, leaving the aging electrical easy to damage insulation, if the electrical equipment failure, equipment operators to lose the last layer of protection, the consequences will be very serious. The spot checks found that 31 batches of the project failed.

Quality supervision departments to explain, the failure of the main reasons: First, the standard part of enterprise security and performance requirements in the poor understanding, implementation is not in place, hire electricians do not know the national electrical safety standards, the responsible persons of the electrical system failure caused by serious consequences of the lack of adequate knowledge; Secondly, some enterprises in order to reduce costs, not set in the product qualified protective bonding circuit and over current protection devices.

Tips

Plastic Machinery Selection Guide

Plastic machinery, in particular injection molding machine, extrusion machine, blowing machine, which is characterized by continuous production needs, and greater power, so high reliability, power consumption, low noise is the preferred target customers. Suggested in the purchase of options to be considered the first high-profile branded presses, while concerned about the configuration of the key components brands, such as hydraulic pumps, hydraulic motors, hydraulic valves, motors, etc., the brand product quality and service are guaranteed. Second, to understand the quality of enterprise management level, for through the ISO9000 quality management system certification and European CE safety certification of enterprises, the safety performance of their products and reliable technical performance; the third investigation related technical documents, such as manual, certificate, packing Single, software, operating instructions, etc., in general, attention to the technical data of enterprises, product quality is relatively more emphasis.

Guangdong Province in 2010 on a regular basis the quality of plastic machinery products of poor quality supervision, inspection and list of products and their manufacturers

No.
 
Name of manufacturer
 
Product Name
 
Trademark
 
Model Specification
 
Production date or batch number
 
Project name failed
 
Cheng Inspection bodies
 
1
 
Jiangmen East Feng Machinery Factory
 
Slitter
 
-
 
1800
 
May 2010 / -
 
1. Direct contact protection; 2. Protection against indirect contact; 3. Protective bonding circuit; 4. Machinery safety guards; 5. Product label; 6. Random file
 
Technical Supervision of Guangdong Province Product Quality Supervision and Inspection Station Machine
 
2
 
Guzhen Town, Zhongshan City Plastic Machinery Co., Ltd. III
 
Granulator
 
Old Three
 
250
 
May 2010 / -
 
1. Protection against indirect contact; 2. Protective bonding circuit; 3. Machinery safety guards; 4. Product label; 5. Random file
 
Technical Supervision of Guangdong Province Product Quality Supervision and Inspection Station Machine
 
3
 
Shun Industrial Co., Ltd., Zhongshan City, Tianxiang
 
Plastic Extrusion Blow Molding Machine
 
STX
 
STXJC-55U2-8-0.2
 
March 2010 / -
 
1. The upper limbs a safe distance from danger zones; 2. Electrical safety (very important item)
 
Technical Supervision of Guangdong Province Product Quality Supervision and Inspection Station Machine
 
4
 
Guangzhou Machinery Equipment Co., a plastic Bin
 
Crusher
 
-
 
7515C
 
May 2010 / -
 
1. Protection against indirect contact; 2. Over-current protection; 3. Protective bonding circuit; 4. Emergency stop devices; 5. Protect the connection circuit continuity test; 6. Insulation resistance test; 7. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
5
 
Jia Machinery Co., Ltd. Guangzhou close
 
Crusher
 
-
 
YMSC-0575-3
 
May 2010 / 010 379
 
1. Protection against indirect contact; 2. Over-current protection; 3. Protective bonding circuit; 4. Emergency stop devices; 5. Protect the connection circuit continuity test; 6. Insulation resistance test; 7. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
6
 
Shunde District of Foshan City Golden River Plastic Machinery Factory
 
Automatic ultrasonic Lu odontoclasis film machine
 
-
 
LCL-1400
 
May 2010 / -
 
1. Direct contact protection; 2. Protection against indirect contact; 3. Over-current protection; 4. Protective bonding circuit; 5. Protective bonding circuit continuity test test; 6. Insulation resistance test; 7. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
7
 
Eagle Machinery Co., Ltd. of Dongguan City
 
Vertical plastic injection molding machine
 
-
 
YG-200
 
June 2010 / 991 025
 
1. Direct contact protection; 2. Protection against indirect contact; 3. Over-current protection; 4. Protective bonding circuit; 5. Protective bonding circuit continuity testing and inspection; 6. Insulation resistance test; 7. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
8
 
Humen, Dongguan City, Jie Jin Machinery Factory
 
Vertical injection molding machine
 
-
 
150
 
May 2010 / -
 
1. Direct contact protection; 2. Protection against indirect contact; 3. Over-current protection; 4. Protective bonding circuit; 5. Protective bonding circuit continuity testing and inspection; 6. Insulation resistance test; 7. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
9
 
Plastic Machinery Co., Ltd. of Shenzhen City Jia Bang
 
Crusher
 
-
 
5HP
 
June 2010 / -
 
1. Protection against indirect contact; 2. Over-current protection; 3. Protective bonding circuit; 4. Protective bonding circuit continuity testing and inspection; 5. Insulation resistance test; 6. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
10
 
Xingtan Town, Shunde District, Foshan City, Xuan Long Plastic Machinery Factory
 
Cutting Bag Machine
 
-
 
XL-26
 
May 2010 / -
 
1. Protection against indirect contact; 2. Over-current protection; 3. Protective bonding circuit; 4. Protective bonding circuit continuity test test; 5. Insulation resistance test; 6. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
11
 
Kennedy Machinery Co., Ltd. of Dongguan City
 
Grinder
 
-
 
700
 
June 2010 / -
 
1. Protection against indirect contact; 2. Over-current protection; 3. Protective bonding circuit; 4. Protective bonding circuit continuity testing and inspection; 5. Insulation resistance test; 6. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
12
 
Co., Ltd Zhongshan City of St.
 
Film blowing machine
 
Power St.
 
SJ45-600
 
December 2009 / -
 
1. Protection against indirect contact; 2. Protective bonding circuit; 3. Machinery safety guards; 4. Emergency stop device
 
Technical Supervision of Guangdong Province Product Quality Supervision and Inspection Station Machine
 
13
 
Nanhai District, Foshan City, under the Bo Ruian Machinery Co., Ltd.
 
Plastic Injection Molding Machine
 
Ryan
 
RY-180FA
 
June 2010 / -
 
1. Grounding and ground signs; 2. Clamping force; 3. Injection rate; 4. Product label
 
Technical Supervision of Guangdong Province Product Quality Supervision and Inspection Station Machine
 
14
 
Guangzhou Machinery Equipment Co., a plastic Bin
 
Shaker
 
-
 
YM-100
 
May 2010 / -
 
1. Protection against indirect contact; 2. Over-current protection; 3. Protective bonding circuit; 4. Protective bonding circuit continuity test test; 5. Insulation resistance test; 6. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
15
 
Jia Machinery Co., Ltd. Guangzhou close
 
Mold temperature
 
-
 
KCT-06
 
-/010385
 
1. Protection against indirect contact; 2. Protective bonding circuit; 3. Protective bonding circuit continuity testing and inspection; 4. Insulation resistance test; 5. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
16
 
Abundance of iron presses (Guangzhou) Co., Ltd.
 
Vertical injection molding machine
 
-
 
FT-400K
 
May 2010 / K1031799
 
1. Direct contact protection; 2. Protection against indirect contact; 3. Protective bonding circuit
 
Product Quality Supervision and Inspection Institute, Guangdong
 
17
 
Abundance of iron presses (Guangzhou) Co., Ltd.
 
Vertical injection molding machine
 
-
 
FT-200
 
May 2010 / K1032326
 
1. Direct contact protection; 2. Protection against indirect contact; 3. Protective bonding circuit
 
Product Quality Supervision and Inspection Institute, Guangdong
 
18
 
Guangzhou Jia-speed Precision Machinery Co., Ltd.
 
Strong Plastic Crusher
 
JASU
 
PC-400
 
December 2009 / -
 
1. Protection against indirect contact; 2. Over-current protection; 3. Protective bonding circuit continuity test test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
19
 
Shenzhen Tong Plastic Machinery Co., Ltd. today
 
Vertical injection molding machine
 
-
 
JT150
 
June 2010 / 7152496
 
1. Protection against indirect contact; 2. Protective bonding circuit; 3. Protective bonding circuit continuity testing and inspection; 4. Insulation resistance test; 5. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
20
 
Derun Machinery Co., Ltd. of Shenzhen City
 
Vertical injection molding machine
 
-
 
DRV4-35T
 
June 25, 2010 / 2010160
 
1. Protection against indirect contact; 2. Protective bonding circuit; 3. Protective bonding circuit continuity testing and inspection; 4. Insulation resistance test; 5. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
21
 
Fidelity blowing Shenzhen Xing Machinery Co., Ltd.
 
Blowing machine
 
-
 
φ65
 
June 2010 / -
 
1. Electrical Safety (General Project); 2. Security protection
 
Product Quality Supervision and Inspection Institute, Guangdong
 
22
 
Shenzhen Jian Machinery Co., Ltd.
 
Injection molding machine
 
-
 
JD150
 
-/150073
 
1. Plasticizing capacity; 13. Injection rate
 
Product Quality Supervision and Inspection Institute, Guangdong
 
23
 
Guangzhou, Shunde District, Foshan City, China Machinery Manufacturing Co., Ltd.
 
Sealing and Cutting Machine
 
-
 
30 inch
 
February 2010 / -
 
1. Direct contact protection; 2. Protection against indirect contact; 3. Protective bonding circuit; 4. Protective bonding circuit continuity testing and inspection; 5. Insulation resistance test; 6. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
24
 
Foshan Shunde Plastic Machinery Factory Beijiao Boxing
 
Sealing Machine CNC
 
-
 
BX-30
 
June 2010 / -
 
1. Direct contact protection; 2. Protection against indirect contact; 3. Protective bonding circuit; 4. Protective bonding circuit continuity test; 5. Insulation resistance test; 6. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
25
 
Foshan Shunde Plastic Machinery Co., Ltd. Hao Exhibition
 
Plastic molding machine
 
-
 
ZFZ001
 
April 2010 / -
 
1. Protection against indirect contact; 2. Protective bonding circuit; 3. Protective bonding circuit continuity testing and inspection; 4. Insulation resistance test; 5. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
26
 
Songs Shunde Industrial Co., Ltd.
 
Plastic Bag Machine
 
-
 
740mm
 
May 2010 / -
 
1. Direct contact protection; 2. Protection against indirect contact; 3. Protective bonding circuit; 4. Emergency stop device
 
Product Quality Supervision and Inspection Institute, Guangdong
 
27
 
Foshan Shunde Plastic Machinery Factory next
 
Film blowing machine
 
-
 
65 × 1700
 
May 2010 / -
 
1. Motor overheating protection; 2. Protective bonding circuit
 
Product Quality Supervision and Inspection Institute, Guangdong
 
28
 
Shunde District of Foshan City, more good press plant
 
Blowing machine
 
-
 
DJ-V-60-40-2B-2
 
June 2010 / 1006021
 
1. The upper limbs a safe distance from danger zones; 2. Electrical Safety (General Project)
 
Product Quality Supervision and Inspection Institute, Guangdong
 
29
 
Plastic Machinery Co., Ltd. of Dongguan City, Poma
 
Plastic Cutting Machine
 
-
 
1m
 
June 2010 / -
 
1. Direct contact protection; 2. Protection against indirect contact; 3. Protective bonding circuit; 4. Protective bonding circuit continuity testing and inspection; 5. Insulation resistance test; 6. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
30
 
Dongguan Tiancheng Machine Co., Ltd.
 
Vertical injection molding machine
 
-
 
TC-150
 
June 2010 / 1006150
 
1. Protection against indirect contact; 2. Protective bonding circuit; 3. Protective bonding circuit continuity test; 4. Insulation resistance test; 5. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
31
 
Dongguan Ding Sheng Plastic Machinery Co., Ltd.
 
The bone machine
 
-
 
DS-700
 
June 2010 / -
 
1. Protection against indirect contact; 2. Protective bonding circuit; 3. Protective bonding circuit continuity test test; 4. Insulation resistance test; 5. Withstand Test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
32
 
Dongguan Changan Machinery Factory creating Hong injection
 
Vertical injection molding machine
 
Chong Hong-mechanical
 
150
 
June 2010 / 2010885
 
1. Protection against indirect contact; 2. Over-current protection; 3. Protective bonding circuit; 4. Protective bonding circuit continuity test test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
33
 
Houjie Plastic Machinery Plant of Steel
 
Horizontal Vertical mixing bucket
 
-
 
1000
 
May 2010 / -
 
1. Protection against indirect contact; 2. Over-current protection; 3. Emergency stop devices; 4. Protective bonding circuit continuity test test
 
Product Quality Supervision and Inspection Institute, Guangdong
 
34
 
Diamond Machinery Factory of Dongguan Daojiao
 
Disc injection molding machine
 
-
 
JG-112
 
June 2010 / 10-91
 
1. Protection against indirect contact; 2. Protective bonding circuit
 
Product Quality Supervision and Inspection Institute, Guangdong